Image Image Image Image Image
Scroll to Top

To Top

Sélectionner une Page:
More Info
Read More
Dolly Crane HD Dolly Crane HD Dolly Crane HD

Dolly Crane HD

Dolly Crane

Logo Cinesyl


Motion Controlled

« 3 in 1 » Camera Platform
Slider – Mini Jib – Tower

  • Griffe-300-Dollycrane-HD-2

    Mitchell Mount on Dolly Crane HD


    The DollyCrane HD allows a wide-range of variable angle operations. No matter how acute the angle, the counterbalance system will assure steady and stable camera movements. A simple, positive-locking adjustment feature allows for camera placement at the exact vertical or off-axis position for creative imaging. Minimum and maximum heights of the DollyCrane HD in the multi-angled positions are dependent on the height of the tripod.


    Dolly Dolly

    By utilizing a movable counterweight, the camera can be tracked up to 160 cm, much further than in typical sliders. The slider rail can be set at almost any angle (max. 60 degrees plus exact vertical 90 degrees movement) and with the counterweight system, the camera can be moved up and down the slider with minimal effort. As the camera moves in one direction, the counterweight tracks in the opposite direction, allowing for continuous perfect balance and control. And that’s what makes DollyCrane HD so unique! The movement of dolly and counterweight is very silent.


    Crane Mini Jib

    In the Mini Jib mode, the DollyCrane HD operates a working diameter of 160 cm on the horizontal. The operator can tilt, pan and move the camera 360 degrees around the base tripod. The counterbalance system is locked to ensure unvarying movements through the full range of the jib arm’s capabilities. The maximum and minimum operating heights of th Mini Jib function are dependent on the height of the tripod.


    Tower Tower

    With the simple removal and repositioning of two handles, the DollyCrane HD becomes a tower allowing for an exact vertical camera move through the full range of the 160cm track. Minimum and maximum heights of the camera moves, when mounted on the tower, are dependent on tripod configuration. The counterbalance system maintains a steady resistance to camera moves reducing the possibilities of irregular movements during the start or finish of a camera move.


    Dolly-Table Table Top

    In keeping with our philosophy, the DollyCrane HD Table Top configuration will broaden even the most creative camera operators capabilities. All the required hardware is included with this state-of-the-art, technologically advanced system making DollyCrane HD the premier choice of professionals worldwide.


    Doly-Motion-Control Motion Control (optional)

    Stepper motor with microprocessor controller enables fast and slow manual movements of camera, programmable repeated movements and time-lapses with DSLR camera’s shutter and exposure control.


  • Motion Control 2

    Motion Control for Dolly Crane HD

    « 3 in 1 » Camera Platform
    Slider – Mini Jib – Tower


    MotionControl – Developed specifically for use with the DollyCrane and DollyCrane HD, you’ll enjoy endless possibilities of camera movement and control. MotionControl allows manual and programmed movements. Every movement, manual or programmed, may be recorded and stored for later use. There are nine persistent banks and one volatile bank available. Each movement can be repeated up to 999 times and extended “time extension” up to 99 times, allowing the user more than enough opportunity to get that perfect shot. You’ll really appreciate the wide range of speed settings from 0-20cm/sec. and a speed ramp range from 0.5-2.5 seconds. Due to the patent pending, precision counter balance system on DollyCrane and DollyCrane HD family, only one motor is required for all functions of the motion control. The MotionControl System allows the use of the mutli-angled slider to achieve a wide range of unique shots.



    DSLR — Time Lapse and Stop Motion Modes:

    Time Lapse Continuous mode allows for continuous movement across the slider during the time lapse process. When using Canon and Nikon DSLR’s and the accessory camera control cable, it is possible to control the shutter speed and exposure from the remote control which contains a built in intervalometer. In this mode it is possible to set the total movement time, number of shots and control the shutter and exposure of a DSLR camera. It is also possible to trigger multiple image sequences from the MotionControl. This can be useful for high dynamic range imaging, exposure-bracketed time lapse or multiple constant- exposure shots for noise reduction in the post production process. The time lapse continuous setting also gives you the option to read a saved track from the memory, or manually set the start and stop position desired.

    Time Lapse After Shots or Shoot-Move-Shoot mode works similar to the continuous time lapse mode, but the camera stops before each shot. Set the distance, number of shots, movement time, and control shutter and exposure of DSLR’s. Multiple image sequences for HDR shooting are also capable in this mode.

    Stop Motion Distance mode allows programmed distance between each shot with precise accuracy. Every move and shot is initiated manually through the controller.

    Stop Motion Shot mode allows camera movement with factory settings and programmed number of shots. In this mode, it is possible to set the total movement time, number of shots and control shutter and exposure of DSLR cameras with the use of the accessory camera control cords.

  • *


    rail length : 190 cm
    tracking length : 160cm
    max payload : 32 kg

    Mini Jib
    max height : up to 290 cm (stand height 150 cm)
    max payload : 32 kg
    pan angle : 360°
    tilt angle : 120°
    tripod attachment : 150 mm halfball
    transport cases : long 195x28x28 cm – short 93x36x22 cm